HOME UPS - The Ultimate Power Support for your Home & Office
Electronic Power Machine
- Microcontroller based design with DSP technology
- PWM Sine wave Output
- SMPS based battery Charger, Charges battery from 110V
- Selectable Charging Current and Voltage
- Complete OL and Short Circuit Protection with facility to run highly Inductive Loads.
- Automatic overload reset
- Protection against abnormal temperature rise
- Can accept any input wave from like sine wave, Square wave, generator etc
- Automotive low battery warning and cut off
- Fuzzy logic Battery charging control
- Closed loop regulated Sine wave output from no-load to full load
- DC 3: fan (12, 24, 48V) Control on PCB
Available four in one:
- Lighting UPS
- Computer UPS
- Battery Charger
- Power Saver
Range: 12 Volts – 400VA, 600VA, 800VA, 1KVA
24 Volts – 1000VA, 1400VA, 2000VA
48 Volts – 2000VA, 5000VA
- Range Available: 400VA, 600VA, 800VA/1KVA/12V, 1KVA/24V, 1400VA/24V, 2000VA/24V and 2000VA, 5000VA/48V
- AC Input: 100 to 285V in INV mode (185 to 255 V in Home UPS mode)
- Output Voltage Range: 225V AC nominal (backup mode)
- Output Frequency:- 50+_0.1HZ
- Output Wave from: Puresine Wave.
- Transfer Time: @30m sec. in Inverter modem <10m Sec. In Home UPS mode
- Display: LED (Mains, Inverter, Charger, O/L, B/L) (Fuse Blown, Hot Condition).
- Battery Charge Range: 115 to 275 V AC.
- Battery Charging Current – 8/11 Amp DC
- Battery Boost Voltage: -13.8/14.2 Volts +-0.1V.
- Battery Low off – 9.6 Volts+- 0.2V.
- Overload: Trip after 10 seconds, four retries.
- Jumper Selections: Mode, Charging Amp / Boost Voltage.
PURE SINE WAVE IN HOME UPS
Please Feel Free to Call Us
Feel free to reach at any time. we are giving 24/7 support